Ball Bearings

LOTTON Miniature BearingMiniature bearings are sometimes referred to as instrument bearings and are used in applications as varied as gyros, anemometers, flow meters, miniature gearboxes, small motors

Deep groove ball bearing is the most widely used type of bearing and has a wide range of applications. They have low friction and are optimized for low noise and low vibration for high speed.

Thin Section Bearings as listed below are available open, shielded or sealed. Available in a variety of standard and custom inch and metric sizes, our thin section bearings offer high performance in corrosive and non-corrosive environments where space devoted to bearings is at a minimum

Angular contact ball bearings have raceways of inner and outer rings, which move relative to each other in the direction of the bearing shaft. This means that these bearings are designed to accommodate combined loads, i.e. both radial and axial loads

Thrust ball bearings are separable bearings. The single-acting thrust ball bearing consists of a shaft washer, a housing washer and a ball set with cage. The double-acting type consists of a shaft washer (centre washer), two housing washers and two ball sets with cages. Thrust ball bearings can be applied for high axial loads and low to medium speeds. However, they cannot take radial loads.